Skip to content
Data recovery lab · Denver, Colorado24/7 emergency line (720) 222-0110Check Case
Back to Mac & Apple Disk / Startup Errors

Diagnostic guide

Mac Stuck on the Progress Bar After a macOS Update – What Is Safe To Try

Updated Nov 15, 2026
6 min read

Symptom

After a macOS update your Mac shows the Apple logo and a progress bar that does not move for a long time.

Some updates really do take a long time, so an hour of slow progress is not proof of failure. A bar that has not moved for many hours, or a Mac that restarts and returns to the same place, needs attention. Apple's own startup guidance starts with gentle steps: disconnect accessories, check that the Mac meets the update's requirements, and try starting in Safe Mode. A failing internal drive can show the same symptom, which is why we avoid steps that write to the disk until the files are protected.

Do not

Avoid These Until Your Files Are Safe

  • Do not erase the Mac or reinstall from Recovery before copying data you need
  • Do not run Disk Utility repairs over and over on a drive that may be failing
  • Do not hard-reset during what may be a real install, without waiting first
  • Do not use third-party 'startup repair' apps
  • Do not open the Mac and unplug components

Why this matters: Reinstalling or erasing can overwrite files, and repeated repairs on a failing drive can deepen the damage. The gentler steps below keep options open.

Cause

Most Likely Causes

  1. 01

    A Long or Slow Installation

    High Likelihood

    Large updates on older Macs or slow drives can take much longer than the bar suggests.

  2. 02

    A Connected Accessory or Incompatible Software

    Medium Likelihood

    Attached devices or third-party extensions can stall startup after an upgrade.

  3. 03

    Low Storage or Interrupted Update

    Medium Likelihood

    The update ran out of space or lost power, leaving the system half-updated.

  4. 04

    Failing Internal Drive

    Medium Likelihood

    Unreadable areas stop the system from loading. The update gets blamed, but the drive is the cause.

What to do

Safe Diagnostic Checks

These checks are non-destructive and safe to perform. Follow them exactly as written.

CHECK-01

Wait, then simplify

  1. 01Leave the Mac plugged in and give it a few hours if the bar is moving even slowly
  2. 02If it has clearly stopped, disconnect everything except power and, if needed, an Apple keyboard and mouse, as Apple's startup guide describes
  3. 03Restart and see whether it completes
CHECK-02

Try Safe Mode

  1. 01On an Apple silicon Mac: shut down, press and hold the power button until startup options appear, select the startup disk, then hold Shift and choose Continue in Safe Mode
  2. 02On an Intel Mac: start up and immediately hold Shift until the login window appears
  3. 03If it reaches the desktop in Safe Mode, restart normally and check for other updates and login items

If the Mac clicks, beeps or the drive sounds wrong, stop and get help.

CHECK-03

Protect your data before further steps

  1. 01If you can reach the desktop in any mode, copy your files to an external drive
  2. 02If you can only reach Recovery, copy files with a Time Machine backup or leave it for assessment instead of reinstalling

Escalate

When Professional Recovery Is Required

High Priority

You should seek professional data recovery if any of these apply:

  • The bar has not moved for many hours and Safe Mode fails
  • The Mac shows a folder with a question mark or a prohibitory sign
  • Disk Utility cannot see or repair the internal drive
  • The Mac has an SSD soldered to the board and no backup exists
  • Reinstall or erase has already been tried

Process

Our Recovery Process

Turnaround Time
3-7 business days
Success Rate
Assessed in the free evaluation; depends on the damage

What happens when you bring your drive to us:

  1. 01Free evaluation: model, storage type, encryption (FileVault, T2 or Apple silicon) and state
  2. 02Where the drive is accessible, image it before any repair
  3. 03Where storage is soldered, assess the supported access routes for that model
  4. 04Extract your files
  5. 05Verify they open
  6. 06Return the data on new media

Ready to Recover Your Data?

Free diagnosis / No data, no charge guarantee

FAQ

Frequently Asked Questions

Related

Related Guides

Back to Mac & Apple Disk / Startup Errors

Free diagnosis

Need Professional Data Recovery?

Free Diagnosis • No Recovery, No Charge

Our certified technicians have recovered thousands of drives with these exact symptoms. Get your free evaluation today.

97% Success Rate
Across all device types
ISO-5 Cleanroom
Class 100 certified facility
24/7 Emergency
Available for critical cases