Diagnostic guide
BitLocker Asks for the Recovery Key on Every Startup After a BIOS Update
Symptom
After a BIOS or UEFI update, or a Secure Boot or TPM change, the PC asks for the BitLocker recovery key at startup, and keeps asking.
BitLocker unlocks automatically only while the startup measurements the TPM sees match what they were when it was set up. Microsoft lists a BIOS or UEFI firmware upgrade, changes to Secure Boot and TPM settings, clearing or hiding the TPM, and changes to the boot manager among the events that send a device into BitLocker recovery. Entering the key once usually gets Windows in. Persistent prompts mean the protector no longer matches the new firmware state, and the usual repair is to suspend and resume BitLocker from inside Windows, not to clear anything.
Do not
STOP - Get the Key in Hand Before You Change Anything Else
- Do not turn BitLocker off before you have the recovery key in hand
- Do not clear the TPM, which Microsoft lists as a trigger for recovery
- Do not flash the firmware again or keep changing Secure Boot and boot-order settings
- Do not reset or reinstall Windows to get rid of the prompt; it removes the files
- Do not enter random digits repeatedly
Why this matters: Microsoft states that Support cannot retrieve, provide or recreate a lost BitLocker recovery key, and that resetting the device removes all of your files. A prompt that is annoying today becomes unrecoverable if the key is lost and the PC is then reset.
Cause
Most Likely Causes
- 01
Firmware Update Changed the Measurements
High LikelihoodA BIOS or UEFI upgrade alters what the TPM measures at startup, so the stored protector no longer unseals.
- 02
Secure Boot or TPM Setting Changed
High LikelihoodA reset to defaults, a Secure Boot key change, or turning the TPM off, hiding it or clearing it changes the measurements.
- 03
Boot Order or Boot Manager Change
Medium LikelihoodMicrosoft lists changes to the boot manager and, with TPM 1.2, boot-device order among triggers.
- 04
Another Recovery Cause Still Present
Less CommonExamples are moving the drive to another computer or a changed partition table. Recovery that repeats may have a second cause.
What to do
Safe Diagnostic Checks
These checks are non-destructive and safe to perform. Follow them exactly as written.
Find the key by its ID
- 01Read the first 8 characters of the key ID shown on the recovery screen
- 02From another device sign in at aka.ms/myrecoverykey with the Microsoft account that was used on the PC
- 03For a work or school PC, use aka.ms/aadrecoverykey or ask your IT department
- 04Check printouts, a USB drive or a text file saved when BitLocker was turned on
- 05Match the key ID before typing the 48-digit key
Several keys can exist under one account. Only the one whose ID matches will work.
After Windows starts, fix the cause, not the symptom
- 01Once Windows is up, do not change firmware settings further
- 02Microsoft documents that suspending and then resuming BitLocker reseals the key without needing the recovery key again; for a work PC ask IT to do this
- 03Make sure a copy of the recovery key is saved somewhere other than the PC
- 04If the prompt returns, note what changed in firmware settings and stop there
Escalate
When Professional Recovery Is Required
You should seek professional data recovery if any of these apply:
- You cannot find a recovery key whose ID matches
- The key is entered correctly but the drive will not unlock
- The drive also shows errors, is failing or is not detected
- Windows has been reset or reinstalled after the prompt and the files matter
- The PC holds business data and the owner or IT has left
Process
Our Recovery Process
- Turnaround Time
- 2-5 business days
- Success Rate
- Assessed in the free evaluation; depends on the damage
What happens when you bring your drive to us:
- 01Free evaluation: identify the protectors and the state of the drive without changing it
- 02Image the drive so no work is done on the original
- 03Unlock the image with a recovery password or key you provide
- 04Repair damaged file-system structures on the image if needed
- 05Extract your files and verify they open
- 06Tell you plainly if no key exists, since the encryption cannot be bypassed
FAQ
Frequently Asked Questions
Related
Related Guides
- 01
Windows Update Triggered a BitLocker Recovery Screen – Finding the Key and Staying Out of a Reset
After an update or restart the PC stops at a blue screen asking for a BitLocker recovery key you do not remember ever seeing. - 02
BitLocker Recovery Key Not Accepted – Data Recovery
You have your BitLocker recovery key, but Windows won't accept it. - 03
Recover Data from BitLocker Drive Without Key
Your drive is BitLocker encrypted and you don't have the recovery key or password.
Background reading
Free diagnosis
Need Professional Data Recovery?
Free Diagnosis • No Recovery, No Charge
Our certified technicians have recovered thousands of drives with these exact symptoms. Get your free evaluation today.
- 97% Success Rate
- Across all device types
- ISO-5 Cleanroom
- Class 100 certified facility
- 24/7 Emergency
- Available for critical cases