Diagnostic guide
Stuck in 'Preparing Automatic Repair' – Getting Your Files Out Before You Reset
Symptom
The PC shows 'Preparing Automatic Repair' or 'Automatic Repair couldn't repair your PC' and restarts again and again without reaching the desktop.
Windows starts Startup Repair on its own after repeated boot failures. When that does not fix the problem you end up in a loop. The cause can be a bad update, damaged boot files, or a drive that is starting to fail. In the last case each restart and each repair attempt reads the drive harder, so the choice of what to try first matters. Your files are normally still on the disk; what is at stake is whether you keep them.
Do not
STOP - 'Remove Everything' Means Everything
- Do not choose Reset this PC with 'Remove everything'
- Do not clean-install Windows over the old one
- Do not keep power-cycling a PC that is also clicking or freezing
- Do not run chkdsk /r on a drive that is making noise
- Do not delete the Windows partition
Why this matters: Reset with Remove everything and clean installs are built to erase. If the drive is failing, repeated forced shutdowns and long repair scans add stress. A copy of your files first turns every later choice into a safe one.
Cause
Most Likely Causes
- 01
Update That Did Not Finish Cleanly
High LikelihoodA cumulative update or driver left Windows unable to boot.
- 02
Damaged Boot Files or Boot Configuration
Medium LikelihoodThe boot manager or its configuration is missing or corrupted, often after a power cut.
- 03
File System Damage or Failing Drive
Medium LikelihoodUnreadable sectors on the system volume stop Windows from loading. The loop is the symptom, not the cause.
- 04
Encryption State Change
Less CommonIf BitLocker is active, a changed boot environment may require the recovery key before Windows RE tools can reach the drive.
What to do
Safe Diagnostic Checks
These checks are non-destructive and safe to perform. Follow them exactly as written.
Listen and observe
- 01Note whether the drive clicks, grinds or stalls on every start
- 02Note whether the PC has an SSD or a hard drive
- 03Photograph the message and any error code shown under Advanced options
- 04If there is clicking or grinding, power it off and stop here
Use a second PC for a safe copy path
- 01Shut the PC down and remove the drive (or take it to a person who can), then connect it as a secondary drive to a working PC with an adapter or enclosure
- 02Copy your folders (Documents, Desktop, Pictures, Downloads under Users) to another drive
- 03If the drive is BitLocker encrypted, you will need the recovery key to open it, so find it first (aka.ms/myrecoverykey)
If you are not comfortable removing a drive, do not force it; ask for help instead.
Escalate
When Professional Recovery Is Required
You should seek professional data recovery if any of these apply:
- The drive makes noise or the PC freezes during boot
- The drive is BitLocker encrypted and you have no key
- Files fail to copy or the drive drops out
- You are not comfortable removing the drive
- A reset or reinstall was already attempted
Process
Our Recovery Process
- Turnaround Time
- 3-7 business days
- Success Rate
- Assessed in the free evaluation; depends on the damage
What happens when you bring your drive to us:
- 01Free evaluation: drive health first, then boot files
- 02Image the drive before any repair is attempted
- 03Extract your user data from the image
- 04If you need Windows running again, repair or reinstall on a new drive, not the old one
- 05Verify that your files open
- 06Return the data on new media
FAQ
Frequently Asked Questions
Related
Related Guides
- 01
'INACCESSIBLE_BOOT_DEVICE' After a Windows Update – Is Your Data Safe?
Windows shows a blue screen with INACCESSIBLE_BOOT_DEVICE (stop code 0x7B) at startup and restarts or loops into recovery. - 02
Windows Update Triggered a BitLocker Recovery Screen – Finding the Key and Staying Out of a Reset
After an update or restart the PC stops at a blue screen asking for a BitLocker recovery key you do not remember ever seeing. - 03
Windows Says 'Your Hard Drive Is Failing' or Shows a SMART or Bad Block Warning – The First 24 Hours
Windows or a monitoring tool warns that the drive is failing, SMART reports a bad status, or Event Viewer logs bad block warnings.
Background reading
Free diagnosis
Need Professional Data Recovery?
Free Diagnosis • No Recovery, No Charge
Our certified technicians have recovered thousands of drives with these exact symptoms. Get your free evaluation today.
- 97% Success Rate
- Across all device types
- ISO-5 Cleanroom
- Class 100 certified facility
- 24/7 Emergency
- Available for critical cases