Diagnostic guide
'The File Record Segment Is Unreadable' on a Hard Drive – What It Means and What To Do First
Symptom
Windows says 'the file record segment is unreadable' when you open a folder or copy a file, and chkdsk does not finish or loops on the error.
On an NTFS drive, every file and folder has a record in the Master File Table. This message means Windows tried to read one of those records and could not. A damaged file system can cause it, but so can a drive that has started to develop unreadable sectors. In that case the problem is physical and every scan makes the drive work harder on the area that is already failing.
Do not
STOP - Do Not Let chkdsk Grind On This Drive
- Do not run chkdsk /f or /r repeatedly, or leave it running for days
- Do not recover files onto the same drive
- Do not keep retrying the same folder hoping it opens
- Do not format the drive or delete the volume
- Do not run defrag or 'optimizer' tools
Why this matters: Microsoft documents that chkdsk /f repairs errors and /r locates bad sectors and attempts to recover readable information, meaning it reads every sector and writes corrections. On a drive with unreadable areas, that is hours of stress on weak heads and a risk of the repair changing structures you needed. Capturing the readable data first removes that risk.
Cause
Most Likely Causes
- 01
Bad Sectors in the Master File Table
High LikelihoodUnreadable sectors landed on the MFT record. This is the classic cause and is a sign the drive is degrading.
- 02
File System Corruption After Unsafe Shutdown
Medium LikelihoodPower loss or a pulled cable left a record inconsistent. The drive itself may be healthy.
- 03
Weak Heads or Platter Surface Damage
Medium LikelihoodOn hard drives, slow responses and read errors across many areas point to mechanical wear.
- 04
Unstable USB Bridge or Cable
Less CommonOn external drives, a poor connection can cause intermittent read failures that mimic bad sectors.
What to do
Safe Diagnostic Checks
These checks are non-destructive and safe to perform. Follow them exactly as written.
Look without repairing
- 01Run chkdsk without any parameters only if the drive is otherwise stable; Microsoft documents that without parameters it displays status and does not fix errors
- 02Open Event Viewer > Windows Logs > System and look for disk or ntfs warnings; take screenshots
- 03Note whether the drive is slow to respond, makes noise, or disconnects
If the drive clicks, stalls for long periods or disconnects, skip this and power it off.
Copy what you can, once
- 01Connect a second drive with enough free space
- 02Copy the most important folders first; skip files that error out instead of retrying them
- 03Stop immediately if the drive slows to a crawl or the transfer freezes
Escalate
When Professional Recovery Is Required
You should seek professional data recovery if any of these apply:
- Folders you need give the error and chkdsk will not complete
- The drive is slow, noisy, or drops offline
- SMART or Windows has reported the drive as failing
- You have already run chkdsk /r and the problem got worse
- The data exists only on this drive
Process
Our Recovery Process
- Turnaround Time
- 3-7 business days
- Success Rate
- Assessed in the free evaluation; depends on the damage
What happens when you bring your drive to us:
- 01Free evaluation including a read-only health check of the drive
- 02Create a sector-level image, using hardware imaging with controlled retries if the drive has weak areas
- 03Rebuild the file table from the image, using backup MFT mirror data where it exists
- 04Extract files with their original folder structure where possible
- 05Verify that a sample of files opens
- 06Return the data on new media
FAQ
Frequently Asked Questions
Related
Related Guides
- 01
CHKDSK Is Not Available for RAW Drives – Data Recovery
When you run CHKDSK, Windows says 'CHKDSK is not available for RAW drives.' - 02
Data Error Cyclic Redundancy Check – External Hard Drive
Windows displays 'Data error (cyclic redundancy check)' when accessing your external drive. - 03
Windows Says 'Your Hard Drive Is Failing' or Shows a SMART or Bad Block Warning – The First 24 Hours
Windows or a monitoring tool warns that the drive is failing, SMART reports a bad status, or Event Viewer logs bad block warnings. - 04
I/O Device Error – External Hard Drive Recovery
Windows displays 'The request could not be performed because of an I/O device error.'
Background reading
Free diagnosis
Need Professional Data Recovery?
Free Diagnosis • No Recovery, No Charge
Our certified technicians have recovered thousands of drives with these exact symptoms. Get your free evaluation today.
- 97% Success Rate
- Across all device types
- ISO-5 Cleanroom
- Class 100 certified facility
- 24/7 Emergency
- Available for critical cases