A card error, cannot access card, or format this card message usually means the camera couldn't read the card's file system. It can happen after the card was removed while the camera was writing, when a battery died mid-shot, when the card was used in several devices, or when the card itself is failing.
Don't format the card, and stop taking pictures. Turn the camera off, remove the card, and slide the write-protect switch on a full-size SD card if it has one.
If a computer can read the card, copy everything off before anything else. If not, recovery software can scan a card that is physically healthy, saving results to a different drive. Cards that aren't detected at all, or that are cracked, need a lab.
Beginner · card error · sd card · camera · format
Deleting photos on a camera, one at a time or with delete all, usually marks them as deleted in the card's file system and leaves the image data in place until it's overwritten.
The fastest way to lose them for good is to keep shooting, because new photos and videos go into the freed space. Put the camera down, take the card out, and keep it somewhere safe.
Photo recovery tools recognize image formats by their structure, including RAW files from most cameras, and can often rebuild deleted photos from a card that wasn't overwritten. Recover to a computer drive, never back onto the card.
Beginner · deleted photos · sd card · camera · overwrite
A standard in-camera format writes a fresh, empty file system on the card. The previous images are no longer listed, but in many cases their data is still there.
Some cameras offer a low-level or full format that overwrites the card's contents, and some cameras and formatting tools send an erase command to the card that clears it. In those cases, recovery is unlikely.
As soon as you realize what happened, stop using the card. Recovery tools that carve images by their structure can rebuild many files, though file names and folder layout may be lost.
Intermediate · format · sd card · camera · photo recovery
Most cameras record MP4 or MOV files. While recording, the camera writes the video and audio data, but the index that tells a player where each frame is, often called the moov atom, is typically written only when recording stops. If the battery dies, the card is pulled, or the camera crashes, the file can be left without its index and won't play.
The footage itself is usually there. Repair tools rebuild the missing index by analyzing the raw data, often using a short healthy clip recorded on the same camera with the same settings as a reference.
Keep the original file untouched, record a sample clip with identical settings, and work on copies. Don't let the camera fix the card by formatting it.
Intermediate · corrupted video · mp4 · mov · video repair
A memory card often survives a dunk better than the device does, since it has no battery or moving parts. The drone or camera itself, with its battery and boards, is much more vulnerable, and salt water corrodes fastest of all.
Remove the battery and card as soon as you safely can, and don't power the device on. If the device has internal storage you need, leave cleaning its boards to a professional; corrosion keeps working after the outside looks dry.
Don't insert the card into a reader while it's wet or dirty. Have its contacts cleaned, or at least make sure it's completely clean and dry, before trying to read it once.
Beginner · water damage · drone · camera · memory card
Security recorders write video continuously to internal hard drives and overwrite the oldest footage once they're full. Many use proprietary file systems that a regular computer can't read, and the window before an event is overwritten can be short.
If you need footage of an incident, export it with the recorder's own tools as soon as possible, and note the difference between the system clock and the real time. If the footage is already gone from the recorder, or the recorder failed, stop it from recording further: power it down or remove the drive.
Recovery from a recorder's drive means imaging the drive and decoding its format to find the right camera channel and timestamps. For legal matters, keep the recorder and drives together and document who handled them.
Advanced · dvr · nvr · cctv · surveillance
Action cameras record high-bitrate video to microSD cards in harsh conditions: heat, vibration, water, and sudden power loss. Long recordings are usually split into chapter files of a few gigabytes each, so one session can be many files.
The most common problems are an unfinished last chapter after the battery died or the camera overheated, and card corruption from the camera being knocked mid-write. A missing chapter breaks the sequence but doesn't damage the others.
Use cards rated for the camera's recording mode, let the camera finish writing before removing the card, and copy footage off before reusing it. If a chapter won't play, keep it; it can often be repaired.
Intermediate · action camera · chaptered video · heat · microsd
Professional cameras use faster card formats: CompactFlash on older bodies, and XQD and CFexpress on newer ones. CFexpress uses the same PCIe and NVMe technology as modern SSDs, which makes these cards fast, and in some ways makes them behave like small SSDs rather than simple memory cards.
Failures look familiar: card errors after removal during writing, controller faults that make a card unreadable, and physical damage such as bent pins in CompactFlash slots.
Don't force a card that won't seat properly; bent pins can damage both the card and the camera or reader. A card that isn't recognized at all needs controller-level recovery, while one that's readable but missing files usually responds to careful carving.
Intermediate · compactflash · cfexpress · xqd · camera media
Many cameras have two card slots, and how you set them matters. Overflow or sequential mode fills one card, then moves to the next. Backup or simultaneous mode writes every image to both cards. A third common option sends RAW files to one card and JPEGs to the other.
For events that can't be repeated, such as weddings or client shoots, backup mode means a single card failure costs nothing. Overflow mode doubles capacity but gives no protection.
Whichever mode you use, copy cards to two places before formatting them for the next job, and format cards in the camera rather than on a computer.
Beginner · dual card slots · backup · camera settings · photographers
Trail cameras spend weeks outdoors writing to SD cards in heat, cold, and humidity, often on weak batteries. A low battery is a frequent cause of corruption, because the camera starts a write it can't finish.
Use quality cards of a size the camera officially supports, replace batteries before they're drained, and copy and reformat cards in the camera each time you collect them. Bring cold cameras indoors and let them warm up before opening them, to avoid condensation on the card.
If images are missing or a card shows an error, stop using that card. Photos from these cameras can often be carved back from a card that hasn't been reused.
Beginner · trail camera · outdoor · sd card · low battery
Cinema and high-end video cameras record compressed raw or intermediate formats at very high data rates to SSD modules, CFexpress cards, or proprietary media. Each manufacturer has its own file and folder structure, and some rely on metadata files that are needed to play the footage correctly.
Recovering a corrupted clip often means rebuilding its structure from frames on the media and from metadata in the clip's sidecar files. Knowing the exact camera, firmware, and recording settings helps.
On set, the standard practice is to offload each card to at least two drives with checksum verification before the card is reused, and to keep the original card untouched until those copies are confirmed.
Advanced · cinema camera · raw video · on-set backup · proprietary formats